Eaton GH100 and GH101 hoses for high-percentage biodiesel blend and high-temperature oil applications

Unlike standard fuel hoses that only last 1-2 years in both high-percentage biodiesel blend and high-temperature applications, GH100 and GH101 hoses are tested and engineered for maximum performance, thanks to a unique polymer that more effectively resists degradation.
Unlike standard fuel hoses that only last 1-2 years in both high-percentage biodiesel blend and high-temperature applications, GH100 and GH101 hoses are tested and engineered for maximum performance, thanks to a unique polymer that more effectively resists degradation.

Power management company Eaton has announced the launch of the GH100 and GH101 hoses for high-percentage biodiesel blend and high-temperature oil applications. Unlike standard fuel hoses that only last 1-2 years, Eaton’s GH100 and GH101 solutions are engineered for maximum performance in systems with a variety of fuel types, featuring a unique polymer that more effectively resists degradation.

The GH100 and GH101 hoses are designed to perform in high-temperature mobile applications, including trucks, busses, agriculture and construction equipment and eco-friendly power vehicles. Compatible with high-percentage biodiesel fuels and new synthetic oils, the solutions support a longer hose life while also ensuring safety requirements and quality standards are met.

“Standard hoses not compatible with biofuels can prematurely crack, leak or burst at high temperatures, leading to a host of safety, liability and warranty issues,” said Doris Showalter, Product Manager, Eaton. “Ushering in the future of sustainable hydraulics, Eaton's new family of biodiesel hoses are tested and engineered to excel in high-temperature conditions – providing users with the ultimate performance assurance and complete peace of mind.”

Unlike conventional hoses that deteriorate at 100 degrees Celsius (°C), the GH100 and GH101 hoses are qualified for -40°C to 150°C with B2, B5 and B20, -40°C to 125°C with B100. With synthetic oils, such as those used in Transmission Oil Cooler applications, GH100 and GH101 are qualified to -40°C to 150°C (175°C intermittent).

Additionally, because GH100 and GH101 hoses are qualified with every blend of biodiesel up to B100, users no longer have to worry about rotating between B5, B20 or higher and ultra-low sulfur diesel (ULSD) fuels. Customers also have a choice of abrasion-resistant fabric or rubber cover and multiple fitting options.

Company Info

  • Eaton Corporation

    9650 Jeronimo Road
    Irvine , CA
    US , 92618

    Eaton is a power management company with 2016 sales of $19.7 billion. We provide energyefficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries.

    Read more

Related Products

Latest News

Tags
Offshore Technology

Dresser-Rand supplies compressor trains for deepwater BP project

 – Copyright BP Images

The Dresser-Rand business, part of Siemens Power and Gas Division, received an order from BP to provide rotating equipment for the Mad Dog 2 project in the deepwater Gulf of Mexico. The scope of supply comprises two DATUM compressor trains driven by Siemens electric motors for export gas service. The equipment is scheduled to ship in 2018, with oil production of the platform expected to begin late in 2021.

Read More

Sponsored Content

Volvo’s Award-Winning CoPilot Interface – Make Every Operator Your Best Operator

With the Volvo award-winning Co-Pilot on-board interface, operators can set up projects with ease, get real-time job information and get more done with less rework. Use Co-Pilot for a multitude of applications, including Load Assist for wheel loaders, Compact Assist for Asphalt with Density Direct™, and Dig Assist for excavators. Learn more about how Co-Pilot can make your jobs more efficient, and more profitable. 

Watch and learn more

Tags
Asset Management

Bearings boost turboexpander performance and longevity

Turboexpanders are the heart of cryogenic process cycles everywhere, including air separation and gas liquefaction systems. At the same time, the component that is critical to those processes and is essential to trouble-free system efficiency is the bearing that supports the shaft linking a turboexpander’s barbell-shaped expansion and compression wheel assembly.

Read More

Tags
Environmental
Industry News

Carbon emission cut by 2040 within reach but requires cooperation

Reduction in coal energy is one part of a successful climate strategy going forward, according to the ETC.

Governments, investors and businesses must seize the opportunity to halve global carbon emissions by 2040 while ensuring economic development and energy access for all, but they must act now to accelerate clean electrification, decarbonization beyond power and energy productivity improvement, says the Energy Transitions Commission (ETC). 

Read More

Tags
Power Systems

Rolls-Royce and MTU products to be presented at OTC

The MTU Series 4000 T95 Tier 4 final engine will be on display in the Rolls-Royce / MTU exhibit at OTC 2017.

Rolls-Royce will feature the latest technologies from MTU and Rolls-Royce on Booth #2261 for onshore and offshore oil and gas applications at the 2017 Offshore Technology Conference (OTC) from May 1 – 4 at NRG Park in Houston, Texas. The exhibit will feature the MTU Series 4000 Bi-Fuel Kit, the 12V 4000 T95 EPA Tier 4 engine and advanced technology for next generation vessels from Rolls-Royce. The MTU brand is part of Rolls-Royce Power Systems.

Read More

Tags
Drilling & Production
Offshore Technology

Companies combine expertise on challenging engineering and hardware support services

Trendsetter Engineering and Add Energy have combined expertise to provide engineering and hardware support services to the industry’s most challenging problems. The companies have recently been awarded a contract to supply engineering expertise and access to Trendsetter’s patented Relief Well Injection Spool (RWIS) in support of an operators’ drilling campaign on a newly sanctioned field development. 

Read More

Tags
Industry News
Offshore Technology

Oil recovery system powered by wind shows potential in testing

The DNV GL-led joint industry project, WIN WIN (WINd powered Water INjection), has completed its first phase and determined that wind power could be used to power offshore water injection. The project is currently moving into its second phase, which includes refining and testing the electrical systems, and investigating possibilities for broader applications. The project consists of four partners: DNV GL, ExxonMobil and ENI Norge – all part of the first phase – and the Norwegian Research Council – a new participant for this second phase. 

Read More

Tags
Instrumentation, Systems & Automation

Load pins able to measure up to 30,000 pounds

The OMEGA LCP Series is a compact load pin with the ability to measure up to 30,000 lbs. These specially designed load pins are ideal for tension and compression measurements and can easily replace existing shear pins, clevis bolts, clevis pins, shear axles and many other types of pinned joints. The LCP Series can be applied on clevis pin shackles, loading cranes, lifting fittings, hydraulic presses, sprockets, pulley axles and more. The LCP load pins offer 0.50% high accuracy, an all stainless steel construction and a standard connector. 

Read More