Tags
Drilling & Production

Xylem submersible pump provides ideal rental solution for lift station and plant repair projects

The Flygt 3000 series is a submersible centrifugal pump which covers flow capacities ranging from 0 to 3000 l/s and discharge heads from 5 to 130 m.
The Flygt 3000 series is a submersible centrifugal pump which covers flow capacities ranging from 0 to 3000 l/s and discharge heads from 5 to 130 m.

Xylem is now offering the Flygt 3000 Series electric submersible pumps as a rental option, ideal for temporary bypass pumping projects at treatment plants and lift stations.

The Flygt 3000 Series of small and mid-sized pumps covers an extensive performance range and are classified as low-, medium-, or high-head pumps. The 3000 Series are non-clog pumps, ideal for handling solids-bearing liquids in a variety of applications. The vast horsepower range enables the customer to meet the requirements of virtually any application.

For municipalities that need to engage in lift station repairs or plant upgrades, the 3000 Series submersible pumps are a cost-effective and environmentally friendly rental alternative that provides a quiet, efficient and easy-to-install bypass solution for many applications. These pumps are now the go-to rental solution when space is a premium at the jobsite, and reducing footprint is required to complete the bypass setup.

“We are thrilled to offer the Flygt 3000 Series as part of our industry-leading rental fleet, to broaden our portfolio and provide the right pump for the job” says Mike Delzingaro, Vice President, Sales & Branch Operations for Xylem’s Americas Dewatering business. “The Flygt 3000 Series pumps with N-technology are known for their quality and reliability, and are another valuable solution we provide, to ensure our customers get exactly what they need for their specific application.”

Company Info

Related Products

Latest News

Tags
Offshore Technology

Dresser-Rand supplies compressor trains for deepwater BP project

 – Copyright BP Images

The Dresser-Rand business, part of Siemens Power and Gas Division, received an order from BP to provide rotating equipment for the Mad Dog 2 project in the deepwater Gulf of Mexico. The scope of supply comprises two DATUM compressor trains driven by Siemens electric motors for export gas service. The equipment is scheduled to ship in 2018, with oil production of the platform expected to begin late in 2021.

Read More

Sponsored Content

Volvo’s Award-Winning CoPilot Interface – Make Every Operator Your Best Operator

With the Volvo award-winning Co-Pilot on-board interface, operators can set up projects with ease, get real-time job information and get more done with less rework. Use Co-Pilot for a multitude of applications, including Load Assist for wheel loaders, Compact Assist for Asphalt with Density Direct™, and Dig Assist for excavators. Learn more about how Co-Pilot can make your jobs more efficient, and more profitable. 

Watch and learn more

Tags
Asset Management

Bearings boost turboexpander performance and longevity

Turboexpanders are the heart of cryogenic process cycles everywhere, including air separation and gas liquefaction systems. At the same time, the component that is critical to those processes and is essential to trouble-free system efficiency is the bearing that supports the shaft linking a turboexpander’s barbell-shaped expansion and compression wheel assembly.

Read More

Tags
Environmental
Industry News

Carbon emission cut by 2040 within reach but requires cooperation

Reduction in coal energy is one part of a successful climate strategy going forward, according to the ETC.

Governments, investors and businesses must seize the opportunity to halve global carbon emissions by 2040 while ensuring economic development and energy access for all, but they must act now to accelerate clean electrification, decarbonization beyond power and energy productivity improvement, says the Energy Transitions Commission (ETC). 

Read More

Tags
Power Systems

Rolls-Royce and MTU products to be presented at OTC

The MTU Series 4000 T95 Tier 4 final engine will be on display in the Rolls-Royce / MTU exhibit at OTC 2017.

Rolls-Royce will feature the latest technologies from MTU and Rolls-Royce on Booth #2261 for onshore and offshore oil and gas applications at the 2017 Offshore Technology Conference (OTC) from May 1 – 4 at NRG Park in Houston, Texas. The exhibit will feature the MTU Series 4000 Bi-Fuel Kit, the 12V 4000 T95 EPA Tier 4 engine and advanced technology for next generation vessels from Rolls-Royce. The MTU brand is part of Rolls-Royce Power Systems.

Read More

Tags
Drilling & Production
Offshore Technology

Companies combine expertise on challenging engineering and hardware support services

Trendsetter Engineering and Add Energy have combined expertise to provide engineering and hardware support services to the industry’s most challenging problems. The companies have recently been awarded a contract to supply engineering expertise and access to Trendsetter’s patented Relief Well Injection Spool (RWIS) in support of an operators’ drilling campaign on a newly sanctioned field development. 

Read More

Tags
Industry News
Offshore Technology

Oil recovery system powered by wind shows potential in testing

The DNV GL-led joint industry project, WIN WIN (WINd powered Water INjection), has completed its first phase and determined that wind power could be used to power offshore water injection. The project is currently moving into its second phase, which includes refining and testing the electrical systems, and investigating possibilities for broader applications. The project consists of four partners: DNV GL, ExxonMobil and ENI Norge – all part of the first phase – and the Norwegian Research Council – a new participant for this second phase. 

Read More

Tags
Instrumentation, Systems & Automation

Load pins able to measure up to 30,000 pounds

The OMEGA LCP Series is a compact load pin with the ability to measure up to 30,000 lbs. These specially designed load pins are ideal for tension and compression measurements and can easily replace existing shear pins, clevis bolts, clevis pins, shear axles and many other types of pinned joints. The LCP Series can be applied on clevis pin shackles, loading cranes, lifting fittings, hydraulic presses, sprockets, pulley axles and more. The LCP load pins offer 0.50% high accuracy, an all stainless steel construction and a standard connector. 

Read More