The OMEGA LCP Series is a compact load pin with the ability to measure up to 30,000 lbs. These specially designed load pins are ideal for tension and compression measurements and can easily replace existing shear pins, clevis bolts, clevis pins, shear axles and many other types of pinned joints. The LCP Series can be applied on clevis pin shackles, loading cranes, lifting fittings, hydraulic presses, sprockets, pulley axles and more. The LCP load pins offer 0.50% high accuracy, an all stainless steel construction and a standard connector.
The Volvo EC350E and EC380E were put up against two industry leaders to see how each would perform in terms of productivity and fuel efficiency. The four comparable machines were equipped with fuel meters and put through the same test, loading trucks at maximum power. The results were used to calculate estimated time and cost to move 551,156 U.S. tons (500,000 metric tons) of material. Calculations are based on 50-minute work hours, 8 hours per day.
The Result: Volvo delivered a 20% lower cost per ton and moved 15% more material per hour. Get tips about how to get the most from your excavator at volvoce.com/exfactor.