The new Winters PFD WinAIR Differential Gauge is suitable for all air and non-corrosive gas installations. PFD can measure differential pressure in one of four units of measurement ("H2O, mmH2O, PSI or PA). The gauge has an industrial grade die-cast aluminum case and an o-ring seal that provide extreme temperature tolerance. The lens comes standard with an easily accessible zero-adjustment screw and is available with an optional setpoint indicator. 1/8" high & low pressure taps are available on the side and back of the gauge which allow the gauge to be mounted in multiple ways based on the application. The gauge can be mounted using the three mounting flush adapters with screws or with other optional mounting accessories offered by Winters.
The PFD Differential Gauge has been engineered for low pressure and differential monitoring for air and non-combustible gases including filters, blowers, vacuums, air handlers and clean rooms.