Penetanguishene , ON
CA , L9M 1E5
The Corporation is the result of a merger between Acutrol, Inc. and Triac Controls Inc., in 1997. Currently, A-T Controls operates out of one facility, in Cincinnati, with several Sales Offices in North America. Our Products are sold and serviced through a network of Distributors and Manufactures Representatives, which cover all of The U.S. , Canada, with parts of Central and South America.
Wajax has added Hidrostal pumps to its product portfolio for municipal and industrial markets. Hidrostal LLC, specializing in pumping solutions for solids and sludge handling, is the leading designer and manufacturer of screw impeller pumps, which are ideal for transporting most sludges, raw sewage and stringy, fibrous fluids.
For the harsh conditions of critical process applications, steam isolation and temperature extremes, the new Crane FKX 9000 provides performance reliability and quality. This new triple offset butterfly valve from Crane ChemPharma & Energy delivers exceptional flow control, optimized Cv and low Delta P in a single valve.
Borets has successfully completed eight North American applications of its Wide Range Wear Resistant (WR2) pump system. The WR2 system is ideally suited for harsh well conditions and has the ability to handle a wide range of production, abrasives and gas with the goal of extending run life and minimizing well interventions.
The new stainless steel versions of Maag’s versatile G Series Internal Gear Pumps are ideal for challenging corrosive applications requiring a durable pump that can move liquids ranging from thin to highly viscous.
Abaque Series Peristaltic (Hose) Pumps have been upgraded to incorporate a stronger and durable rotor design and innovative hose holding system.
Self-priming and valve-less, the new Tornado T2 lobe pump is a positive displacement pump ideal for any kind of liquid, including media containing gas, solids or fibrous matter. Completely redesigned to increase reliability, maintenance and performance, while reducing the total cost of ownership, the pump can be used in intermittent, continuous or metering applications.
The Boerger BLUEline rotary lobe pump is a self-priming, valveless, positive displacement pump available in 21 models in six series delivering flow rates up to 7,500 gpm. This heavy-duty pump is capable of running dry for a short time and can be used for loading or unloading by reversing the flow direction.
Wajax Industrial Components has added Lutz-JESCO dosing and metering pump equipment, chemical feed systems, and related components to its product portfolio, offering customers across Canada a variety of pumps and pumping systems designed for some of the harshest operating conditions that exist.
In the oil and gas industry, diaphragm pumps are used within a wide performance range, from exploration through processing and up to transportation to the consumer.
The large-scale hydraulic pumps that operate at the heart of the oil and gas industries often provide many years of reliable service. Inevitably though, heavy use over long periods takes its toll. As well, changes to the operating environment can mean that pumps installed earlier are no longer properly matched to new requirements. In either case, owners are faced with the need to replace or refurbish older equipment.
|In January Netherlocks Safety Systems launched its next generation Valve Position Indicators for manual multi turn valves: the VPI A-series and S-series. With these new models, Netherlocks offers a highly accurate and reliable alternative for existing position indicators in the market.
KSB’s B-Pumps are designed to extract water from deep wells or boreholes. These products, which are also known as Deep Well Turbine or DWT pumps, have their intake and impellers located at the lower end of a long vertical tube and discharge nozzle positioned at the top. The motor is mounted on a pedestal that sits above the tube where it is dry and readily accessible for service. Because of their modular design, the length of the assembly can be varied by changing the number of tube and drive shaft stages, up to a maximum suspended depth of 120 metres. The type of impellers and the number of impeller stages can also be customized to meet an application’s head and flow requirements
SPX FLOW may be a relatively new name in pumping solutions for the oil and gas industry, but the brands within it have in-depth expertise and more than 140 years’ of experience with the industry. 2007 saw the formation of Clyde Pumps through the acquisition of Weir Pumps. A further merger with Union Pumps formed the ClydeUnion Pumps business, which was acquired by SPX in 2011. This heritage is displayed by the ClydeUnion Pumps brand today.
Wilden, part of PSG, a Dover company and a worldwide leader in air-operated double-diaphragm (AODD) pump technology, is pleased to announce the release of its new PS20 102 mm (4”) Original Metal AODD Pump equipped with the energy-efficient Pro-Flo SHIFT Air Distribution System (ADS). This new high performance pump features the reliability and energy savings of the Pro-Flo SHIFT ADS while its clamped configuration allows for easier maintenance, diaphragm replacement and cleaning.