SPX FLOW has a long history in supplying portable pump technology to the oil and gas industry. Some of its models have proved so successful and popular that they have been around (upgraded and improved) for nearly 50 years and continue to be selected as reliable workhorses for the industry. Of course, technology has advanced over time, creating higher speeds for even greater efficiency, while maintaining high levels of performance and reliability.
Using the combined expertise from its acquisitions of Dresser-Rand and Rolls-Royce Energy business, Siemens launches the latest evolution of its gas turbine portfolio – the SGT-A35 RB. The unit addresses the need for more cost-effective solutions for the offshore oil and gas industry by increasing the power density of the topside power generating equipment, thus reducing the required space claim. The lightweight, aeroderivative gas turbine can generate up to 38 megawatts (MW) and is integrated into a compact, lightweight Dresser-Rand package, which is up to 30 percent smaller and lighter than Industrial RB211 predecessors.
This combination produces a compelling solution for the challenging requirements of offshore applications, like floating production, storage and offloading (FPSO) vessels. FPSO vessels have become increasingly popular as oil and gas production moves towards deep-sea regions and harsher offshore environments to capture stranded reserves. With higher output and power density than comparable products, the SGT-A35 RB turbine offers several cost-effective solutions for this and other challenging offshore applications.
The SGT-A35 RB gas turbine, previously known as the Industrial RB211-GT30, is based on the proven pedigree of the Industrial RB211 and Industrial Trent 60 gas turbines, built with Rolls-Royce Aero Engine technology. This trusted legacy, evolved over 40 years of technological advancements, has more than 800 installations worldwide exceeding 37 million operating hours. The SGT-A35 RB variant introduces a lightweight free-power turbine derived from Rolls-Royce aerospace and marine Trent, as well as Siemens Industrial Trent 60. All rotating components are proven by millions of hours accumulated in flight, as well as industrial and marine service.
The SGT-A35 RB gas turbine is available in 34 and 38 MW variants to match a range of application requirements. Both ratings are available for mechanical drive and 60 Hertz or 50 Hertz electrical generation. In this configuration, the gas turbine can directly drive a 2-pole A/C generator without the need for a gearbox. The thermal efficiency of the gas turbine exceeds 40 percent at ISO conditions. The performance is ideal for hot climates and at 30 °C, the gas turbine retains more than 90 percent of its ISO power output.
The Dresser-Rand package uses fit-for-purpose packaging features and configurable options proven across oil and gas applications. Its modular design facilitates easy maintenance and reduces downtime to maximize availability and reduce clients’ operating expenditures. The package has also been designed to quickly exchange the complete gas turbine and power turbine. Over the years, the Dresser-Rand business has supplied more than 1,000 aeroderivative gas turbine packages to the oil and gas industry.
“With the highest power density in this class we help offshore operators with a significant challenge,” said Judy Marks, head of New Equipment Solutions for the Dresser-Rand business. “With gas turbines used as prime movers in offshore installations, project developers can simultaneously reduce capital investment and increase production capacity to achieve desired returns.”
More from Offshore Technology
Schlumberger has introduced the TerraSphere high-definition dual-imaging-while-drilling service at SPE Offshore Europe Conference and Exhibition.
Aberdeen-headquartered asset integrity management firm IMRANDD is set to launch Advanced Inspection Data Analytics (AIDA), a tool which has the potential to save companies upwards of 20 percent a year in inspection costs per asset and several million dollars from unplanned outages (even preventing one days outage could save upwards of $1 million).
A major new initiative that adds genomics technologies to traditional geoscience aims to reduce the risk for oil exploration in Nova Scotia's offshore.
Wild Well Control, Inc., a Superior Energy Services company and a global leader in well control and engineering services, is pleased to announce a new contract with Fugro for the provision of BOP intervention skids and test units for inclusion in its Subsea Response Kit. As part of the WellCONTAINED subsea capping stack program, the new 450/150 Mark 3 BOP intervention skids from Fugro are an advancement in both pumping capability and water depth rating and will replace the existing equipment in inventory.
C-Innovation, LLC (C-I), an aﬃliate of Edison Chouest Offshore (ECO) and its family of companies, has been awarded a significant contract to perform Riserless Light Well Intervention (RLWI) activities for BP in the Gulf of Mexico.
Unique Group, one of the world's leading integrated subsea and offshore solution providers, has announced the launch of state-of-the-art survey equipment calibration services from its Houston base.
Newfoundland and Labrador has an opportunity to become one of the most competitive offshore oil and natural gas jurisdictions in the world, but only if Newfoundlanders and Labradorians vote for energy in the next provincial election, according to the Canadian Association of Petroleum Producers (CAPP). In its Newfoundland and Labrador Energy Platform, Oil and Natural Gas Priorities for a Prosperous Newfoundland and Labrador, CAPP made a series of action-oriented recommendations aimed at increasing industry competitiveness through improvements to regulatory, fiscal, and economic policies, and the timely expedition of projects.
An energy efficient, modular panel system, the nVent RAYCHEM ArcticStep provides reliable ice protection for offshore platforms, vessel walkways and deck surfaces in the oil & gas and marine industries.
Through its Plenty brand, SPX FLOW has long served the oil and gas sector with high performance, reliable filtration solutions. As an approved vendor for many major operators, it offers robust, reliable filters to meet even the most stringent of requirements and regulations. For two offshore operators, the Plenty brand was the obvious choice to meet their needs for new FPSOs.
Sulzer Mixpac USA, Inc., an innovator of 2-component adhesive dispensing systems, announces the availability of MIXPAC MixCoat Manual, a member of the innovative MIXPAC MixCoat cartridge-based 2-component dispensing system family. The MixCoat Manual protective coating dispensing system features a lightweight design with a unique brush assembly on a manual dispenser, which greatly increases stripe coating productivity and speed. The MixCoat Manual system is ideal for repairs and rope work on offshore oil and gas, petrochemical, marine, and bridge repair applications.
Logan Industries, a hydraulic repair, manufacturing and rental company, has successfully completed a Reduced Bore Direct Acting Tensioner (RB-DAT) project to enable the use of the DAT in shallow water.
Subsea Integration Alliance has announced the award of integrated subsea engineering, procurement, construction, installation and commissioning (EPCIC) contracts. These awards, by Esso Australia Pty Ltd, represent the first integrated subsea project for Subsea Integration Alliance in Australia combining OneSubsea and Subsea 7 expertise in subsea production systems (SPS) and subsea umbilical, riser and flowline (SURF) systems.
Baker Hughes, a GE company announces the launch of its new approach to subsea development: Subsea Connect, including its Aptara TOTEX-lite subsea system, a suite of new lightweight, modular technologies designed for the full life of field. By combining planning and risk management, new modular deepwater technology, innovative partnerships and digital tools into a single offering, Subsea Connect can reduce the economic development point of subsea projects by an average of 30 percent and has the potential to unlock an additional 16 billion barrels of reserves globally.
Chet Morrison Contractors has formed a strategic partnership with iSIMS to launch the iJacket, a new optimized method in jacket and foundation design. The patented iJacket is more structurally optimized than the conventional true X-braced jacket design, supporting the same deck load, conductor/riser count, drilling deck, wind turbine or other payload as its conventional counterpart.
Halliburton XtremeGrip liner hangers have been installed to a depth of 30,924 feet in the Gulf of Mexico Hess-operated Stampede deepwater development, setting a record depth for the XtremeGrip system. To facilitate the completions, Halliburton installed a total of 37 XtremeGrip expandable liner hangers across seven wells to date, with no liner-top leaks or remedial work required.
Schlumberger introduced the GyroSphere MEMS gyro-while-drilling service at Offshore Northern Seas (ONS). The GyroSphere service responds to the needs of E&P companies for a faster and more rugged, gyro-surveying while-drilling tool that increases drilling efficiency and reliability while reducing drilling risks.
With more than 1600 runs and 730 activations, operators across the globe are cutting rig time by deploying the DAV MX CircSub, the flagship tool from specialist oilfield service company, Churchill Drilling Tools. Run in hundreds of wells every year and recognised for its reliability, resilience and versatility, the dart activated DAV MX is the ultimate downhole circulation tool.
In a collaborative effort, designed to improve vital protection of offshore assets, the Oil & Gas Technology Centre (OGTC) in Aberdeen, UK is successfully conducting trials of an advanced anti-corrosion coating on two North Sea offshore platforms.
Industry leaders have, this month, joined together to shape the future of decommissioning through the formation of the Decommissioning Leadership Group (DLG). Conceived and managed by Decom North Sea, the DLG held its inaugural meeting at The Chester Hotel in Aberdeen earlier in June with the mission to set out a strategy for leading the development of an efficient and effective oil and gas decommissioning sector.
Churchill Drilling Tools has revealed that its flagship tool, the DAV MX CircSub, made a major contribution to a recent successful Managed Pressure Drilling (MPD) run in the North Sea.
An acoustic jumper metrology was successfully conducted using the Sonardyne Connect software in conjunction with 4D Nav's remote survey system in a joint program between 4D Nav and i-Tech Services. The metrology took place as part of remote survey trials during a Subsea 7 project earlier this year in the Gulf of Mexico.
Ardyne, a provider of innovative plug and abandonment and slot recovery technology, has been selected by Statoil for the design and development of a combined casing vibration and pulling system.
Siemens has signed an agreement with WorleyParsons to explore greater collaboration on energy and power infrastructure projects, grid optimization, integration of renewable technologies, and energy efficiency and storage technologies in North East South America and the Caribbean (NESAC) region.
A clean, reliable power supply is critical for offshore oil and gas assets. Siemens is now applying its extensive electrification experience in the marine industry to offshore oil and gas, with a focus on reducing emissions and risk in particularly unforgiving operational environments. The company's advanced lithium-ion battery-based solution, known as BlueVault, is suited for both all-electric and hybrid energy-storage applications.
LORD Corporation, a global diversified technology and manufacturing company, has been selected as a recipient of the 2018 Spotlight on New Technology Award, an awards program via The Offshore Technology Conference (OTC) that showcases the latest and most advanced hardware and software technologies leading the oil and gas industry into the future. LORD is one of only 17 companies and technologies honored with this award this year.
Offshore operators collaborate with CSA Ocean on deepwater sampling and monitoring equipment program
CSA Ocean Sciences Inc. (CSA), a marine environmental consulting firm, and HWCG LLC, a consortium of 18 offshore oil and gas operators, collaborated on the design of a deepwater sampling and monitoring equipment program to support the environmental needs of the offshore industry. The equipment program remains containerized, on standby, and ready to be immediately mobilized in the event a deepwater blowout occurs in the U.S. Gulf of Mexico.
The Offshore Technology Conference (OTC) announces that 17 technologies will receive the 2018 Spotlight on New Technology Award, two of which are being recognized in the Small Business category.
Magma Global m-pipe, based on high-performing VICTREX PEEK thermoplastic composite, has recently achieved the world's first qualification for a subsea pipe product under DNVGL-RP-F119 for Thermoplastic Composite Pipe (TCP).
The Canada-Newfoundland and Labrador Offshore Petroleum Board (C-NLOPB) has lifted the notice to suspend operations for the SeaRose floating production, storage and offloading (FPSO) vessel and associated facilities.
Husky Energy's SeaRose floating production, storage and offloading vessel (FPSO) will suspend operations in the wake of an investigation following a near miss with an iceberg in March of 2017.
BiSN, which offers innovative metal-to-metal downhole sealing solutions, has been awarded significant investment by the Aberdeen, UK-based Oil & Gas Technology Centre (OGTC).
Ardyne, provider of innovative plug and abandonment and slot recovery technology, has saved more than a day of rig time on a planned three-and-a-half day operation and improved efficiencies by thirty-five percent for UK-based operator Fairfield, with the help of its unique Casing Recovery Toolbox.
Ashtead Technology is pleased to announce that it has completed its joint venture with Forum Energy Technologies, Inc. with effect from 3 January 2018.
The first full scale prototype of a subsea variable speed drive has been successfully tested in a sheltered harbor in Vaasa, Finland, taking the vision of an all-electric subsea processing facility one step closer to reality. A variable speed drive is needed to boost the productivity of oil and gas processes and improve energy efficiency, while providing the highest reliability.
ABB will provide Woodside, Australia's largest independent oil and gas company, with a PowerStore Battery storage system that is capable of remote management of operations and service. The system will be installed on the Goodwyn A platform. This innovative ABB solution will contribute to Woodside's 2020 goal of reducing carbon emissions and will help lower cost of operations and maintenance.
Add Energy, an international energy consultancy provider, has partnered with Transborders Energy (TBE) and joined forces with TechnipFMC and MODEC to create a unique and fast deployment business model for the FLNG (floating liquefied natural gas) industry that will free up small-scale stranded resources around the world and establish a new concept in global gas field development.