Tags
Instrumentation, Systems & Automation

Electronic load monitoring combined with voltage distribution

Weidmuller introduces a new addition in the Klippon Connect portfolio of products and services for panel building- maxGUARD. With maxGUARD, the electronic load monitoring ELM devices combined with distribution terminal blocks can be customized to provide selective load protection in 24V DC power distributed systems for industrial automation applications. With combining load monitoring and potential distribution into one complete solution, this offers users time-savings during installation, increased safety against failure, and DIN-rail space savings while being highly service friendly.

The modular maxGUARD system is designed to meet specific requirements for automation control panels. It contains three main cross-connection channels- positive, negative and internal signaling. This design increases the number of possible contacts from the electronic load monitoring device outputs (positive and negative) into the terminal blocks, providing efficient connections for the distribution board loads, as well as reduced wiring. Integrated test points in maxGUARD's terminals and a disconnect lever for load circuit galvanic isolation helps to simplify testing and troubleshooting.

Available in a range of single-channel and four-channel variations (both standard and conformal coating), maxGUARD provides application flexibility for custom solutions. The space-saving maxGUARD modules have a 6.1mm housing and feature push-in connection technology. The rated operating voltage is 24V DC, and the complete system has a maximum current capacity of 40A. The wide operating temperature range extends from -25°C to +55°C (without derating).

The terminal cross-sections are 16mm² for the feed-in module, 2.5mm² for the electronic load monitoring (ELM), and 1.5mm² at the top and 2.5mm² at the bottom of the potential distribution terminal block. maxGUARD modules are cULus listed, Class 2 Certified (1A, 2A and 4A modules), CE rated and carry a wide range of global approvals. maxGuard can be pre-configured using the Weidmuller Configurator, a free software download available on the Weidmuller website. 

Weidmuller supports customers and partners around the world with products, solutions and services in the industrial environment of power, signal and data. The company develops innovative, sustainable and useful solutions that set standards in Industrial Connectivity today and continually work toward providing solutions for the technology challenges of tomorrow. The Weidmuller Group owns manufacturing plants, sales companies and representatives in more than 80 countries.

Company Info

  • Weidmuller

    10 Spy Court
    Markham , ON
    CA , L3R 5H6

    Weidmuller is the leading provider of solutions for the transmission of power, data and control signals in industrial environments. The company develops, produces and sells industrial electronics, network infrastructure components and connectivity solutions such as Wireless Solutions, Industrial Ethernet, Relays, Power Supplies, I/O modules, printed circuit board connectors, terminal blocks and complete DIN Rail assemblies. The Weidmuller group has a strong international focus with manufacturing and sales locations in over 70 countries.

    Read more

Latest News

Tags
Asset Management

Analytics-driven energy management aids in carbon footprint reduction

The discussion about climate change has been taking place for many years and is still a hot topic, now more than ever before. This debate has led to global initiatives to reduce carbon footprints, which is high on the agenda of almost every country's government. Regulations on a global, regional and local scale have been established to reduce greenhouse gas emissions, which heavily impacts the oil & gas industry. To achieve those goals and prove regulatory compliance, the industry is rapidly adopting the ISO 50001 standard to improve the organization's energy performance and make climate part of their corporate strategy.

Read More

Alliance Tire launches new line of rugged Galaxy OTR tires

The Galaxy MGSR 200 S-pattern grader tire.

Alliance Tire Americas, Inc. (ATA) launched a rugged, new line of Galaxy brand radial off-the-road (OTR) tires at Waste Expo in Las Vegas. Built for the special demands placed on loaders, dozers, backhoes, foklifts, articulated dump trucks and graders, the Galaxy radial OTR line features all-steel radial construction for puncture resistance and reduced heat buildup, as well as special compound for longer service life, according to Brian Sheehey, Vice President of Marketing for ATA. The result is a line of tires that deliver outstanding performance and a lower total cost of ownership.

Read More

Sponsored Content

Are all excavators the same?

Among the top brands, many believe all excavators are the same. But when you look closely, you can spot the small differences in design that add up to huge differences in productivity and efficiency — differences that can boost your profitability. 


Read More

Tags
Instrumentation, Systems & Automation

Alliance Sensors introduces advanced LVDT signal conditioner

H.G. Schaevitz LLC dba Alliance Sensors Group introduces its latest LVDT signal conditioner, the highly advanced S2A. This LVDT signal conditioner offers smart and fast LVDT/RVDT setup and has been engineered to work with the widest range of LVDTs, RVDTs, and inductive half-bridge sensors including 3-wire GE LVRTs and GE gas turbine buck-boost style LVDTs. The signal conditioning module has cyber security tamper prevention and notification features that no other manufacturers have even considered, providing confidence that the unit has not been compromised. 

Read More

Tags
Drilling & Production
Industry News

Delphi Energy wraps up successful winter capital program

Delphi Energy Corp. has completed its 2018 winter capital program including the Company's Bigstone Montney amine processing facility, the drilling of four (2.6 net) new Montney wells, and the completion of seven (4.6 net) new wells. The extended winter conditions have allowed the Company to get all seven wells pipeline connected to its facilities, with plans to have all the wells on production in the second quarter.

Read More

Tags
Instrumentation, Systems & Automation

Lower-cost, high performance controller introduced by Bedrock Automation

Bedrock Automation, maker of the Bedrock Open Secure Automation (OSA) system, has introduced a lower-cost and high-performance controller that combines PLC, RTU and edge control; intrinsic cyber security; and universal I/O into a compact standalone module that is ideal for remote monitoring and control applications. The Bedrock OSA Remote is configured with the standard Bedrock IEC 61131-3 engineering tools, and features a wide operating temperature range, a hardened metal enclosure, and pricing below conventional mini PLCs or RTUs. 

Read More

Tags
Industry News

Fluor Awarded Contract for Marathon Petroleum’s STAR Program at Galveston Bay Refinery

Fluor Corporation has announced that it was selected by a division of Marathon Petroleum Corporation (MPC) to execute the engineering and procurement scope for MPC's South Texas Asset Repositioning (STAR) program at its Galveston Bay refinery in Texas City, Texas. Fluor booked the undisclosed contract value into backlog in the first quarter of 2018. 

Read More

Tags
Industry News

NETZSCH showcasing NOTOS Multiple Screw Pumps at 2018 Offshore Technology Conference

NETZSCH Pumps North America, LLC, has announced that they will be highlighting its NOTOS Multiple Screw Pumps at the Offshore Technology Conference (OTC 2018), which will be held April 30 - May 3, 2018 at NRG Park, in Houston, Texas. The pumps will be featured in the German Booth 3625-18 and in Brazilian pavilion at Booth 215-35. Ideal for pumping everything from light fuel oil to viscous asphalt, the NOTOS Multiple Screw Pump is an excellent choice for rail car and ship loading and offloading, as well as tank-to-tank transfer. 

Read More

Tags
Drilling & Production
Software & IT

Landmark launches DecisionSpace software to improve production potential

Landmark launches DecisionSpace software to improve production potential

Landmark, a Halliburton business line, launched DecisionSpace Production Engineering and DecisionSpace Production Insights software to help operators better utilize data to reduce costs and unlock production potential. These offerings strengthen the DecisionSpace Production portfolio by adding analytical dashboards and production engineering capabilities. Both are integrated with economics and reservoir information to help solve production challenges quickly and cost-effectively.

Read More