Tags
Environmental
Occupational Health & Safety
Power Systems

Latest mobile dust suppression design features Tier 4 Final Gen Set

The DB-60 Fusion dust suppressor features a Tier IV Final-compliant generator.
The DB-60 Fusion dust suppressor features a Tier IV Final-compliant generator.

BossTek has updated its family of self-powered dust suppression equipment with Tier IV Final-compliant generators, ensuring compliance in all 50 states and Canada.  BossTek made the announcement with the debut of the new DustBoss DB-60 Fusion, a field-proven suppression system driven by a high-reliability 25 HP electric motor and paired with a gen set powered by a heavy-duty 4-cycle indirect injection diesel engine.  Designed, engineered and assembled in the USA, the generator features a dual-containment fuel cell, heavy gauge lockable enclosure and oversized brushless alternator for easy starting.  

Permanently mounted on a rugged road-worthy trailer, the company's Fusion lineup is proving to be a popular and effective means of delivering versatile, mobile dust suppression technology to sites that lack a readily available power source.  The company expects to unveil two other Fusion models in early 2019, giving customers the ability to select the size and coverage range needed to best suit their operations.

The new generator series is designed with sound attenuation for excellent noise reduction and a multi-voltage switch with utility power outlet in all voltage modes.  The digital engine / generator controller is equipped with single button stop / start and an 80-gallon fuel capacity, giving the units a run time of more than 24 hours at a prime rating of 45 kVa.  Like its previous Fusion systems, BossTek warrantees the DB-60 Fusion for three years / 3,000 hours, with 5-year / 5,000 coverage on the electric motor and a 2-year / 2,000 hour warranty on the generator.

What Tier IV Means
Tier 4 refers to the latest emission milestone established by the U.S. Environmental Protection Agency (EPA) and the California Air Resources Board (CARB).  The regulations apply to new engines found in off-road equipment, including construction, mining and agricultural equipment, as well as marine vessels, locomotives and stationary engines used in industrial and power generation applications.  

Tier IV-compliant engines are designed to significantly reduce emissions of particulate matter (PM) and oxides of nitrogen (NOx) to near zero levels.  Relative to previous emissions standards, Tier IV-compliant engines reduce emissions by over 95 percent for most agricultural and construction equipment and just over 86 percent for much larger applications such as locomotives and marine vessels.  The Tier 4 emission standards are roughly similar to emission reduction requirements for engines that power heavy-duty trucks.

  • The touch screen control panel is protected in a NEMA 3R cabinet.
    The touch screen control panel is protected in a NEMA 3R cabinet.
  • The system’s gen set is powered by a heavy-duty 4-cycle diesel engine.
    The system’s gen set is powered by a heavy-duty 4-cycle diesel engine.

How It Works
The DB-60 Fusion drives pressurized water through a circular stainless steel manifold with 30 atomizing spray nozzles, then launches millions of tiny droplets with a powerful fan that produces 30,000 CFM (849.50 CMM) of air flow.  Atomized mist droplets of 50 to 200 microns in size are thrown out in a 200 foot (60 meter) cone at an adjustable 0 to 50° elevation angle, capturing airborne dust particles and dragging them to the ground.  Unlike industrial sprinklers used for the same purpose, which can require hundreds of gallons of water per minute, the DB-60 only uses about 23 GPM (87 LPM) to help avoid pooling or runoff.

A touch screen panel for controlling the dust suppression unit is encased in a NEMA 3R cabinet, allowing operators to control oscillation, booster pump, fan and water.  The cabinet is constructed for outdoor use, designed to provide protection against solid foreign objects (such as dirt), air (dust, emissions), water (rain, sleet, snow) and ice formation.  The system provides valuable mobility and versatility in one of the most popular and effective dust suppression designs on the market, able to deliver up to 62,800 square feet (5,834 square meters) of coverage.  

"Maintaining air quality is essential for communities near a demolition project, mining operation or other bulk material handling activities, but even in places with little infrastructure, dust can choke worksites and foul equipment," said Project Engineer Jason Lesch.  

"We engineered the Fusion to be highly mobile, with its own power source, so it can be easily towed anywhere on a job site."Equipped with an in-line 75 mesh, 200 micron filter, the unit can be specified with special filtration to accommodate non-potable water sources.  In addition, the new design can be optimized with a Variable Frequency Drive (VFD) to precisely adjust fan speed.  An optional dosing pump is available for precise metering of additives to enhance particle control even further. 

Company Info

Latest News

Tags
Industry News
Pipelines

City request to stop work at Trans Mountain terminal denied by NEB

In its decision, the NEB found that the piping modifications at the Burnaby Terminal are not associated with the Expansion Project and that the relocation and decommissioning Orders appropriately allow Trans Mountain to optimize the site in preparation to offer new services to shippers.

The NEB has rejected a request by the City of Burnaby to rescind two Orders that authorize Trans Mountain Pipeline ULC to undertake pipeline relocations and decommissioning works at its Burnaby Terminal. The decision enables the company to continue its ongoing work to modify existing piping and related infrastructure within the facility.

Read More

Tags
Industry News

Bureau Veritas awarded major inspection contract for new oil field development

The frame agreement between Bureau Veritas and operator Neptune Energy will run until December 2022 and, as the development progresses, it may see Bureau Veritas provide third-party inspection services in Newcastle, Evanton, Le Trait, Ulveston, and other European locations and further afield globally.

Bureau Veritas, a leader in laboratory testing, inspection and certification services, has been awarded a four-year contract with Neptune Energy to provide second and third-party inspection services for the new Fenja oil and gas field development, offshore Norway.

Read More

Tags
Drilling & Production
Industry News
Offshore Technology

Subsea Integration Alliance receives EPCIC contracts offshore Australia

The OneSubsea scope includes the provision of two vertical monobore on-wellhead production trees, wellheads, controls and installation and commissioning services.

Subsea Integration Alliance has announced the award of integrated subsea engineering, procurement, construction, installation and commissioning (EPCIC) contracts. These awards, by Esso Australia Pty Ltd, represent the first integrated subsea project for Subsea Integration Alliance in Australia combining OneSubsea and Subsea 7 expertise in subsea production systems (SPS) and subsea umbilical, riser and flowline (SURF) systems.

Read More

Tags
Industry News

Packers Plus successfully installs more than 200 PrimeSET liner hangers in North America

The PrimeSET Liner Hanger is designed for challenging applications. This technology can handle high torque, carry heavy weight and provides the ability to rotate, push and pull the liner while running in-hole without an early release of the running tool.

Packers Plus Energy Services Inc. has successfully installed the TREX PrimeSET Liner Hanger system in 216 wells across North America. This liner hanger system, which can be used in both cemented and open hole applications, is engineered with unique anti-preset features to ensure reliability and performance, resulting in time and cost savings for operators.

Read More

Tags
Instrumentation, Systems & Automation

Ametek introduces AMEVision communication and display system capability for 3050 moisture analyzers

The 3050 series analyzer can be pre-configured at the factory to directly communicate with AMEVision, eliminating the need to set it up, which will ultimately save time in the field.

AMETEK has broadened its AMEVision communication and display system capabilities to include the 3050 series of moisture analyzers. Originally designed for WDG-V analyzers, the AMEVision system provides real-time moisture measurements and trend data while also detailing a variety of maintenance and troubleshooting information.

Read More

Tags
Industry News
Shows & Events

New work trucks and equipment rolling out at The Work Truck Show 2019

Show attendees will have the opportunity to check out products from 26 first-time exhibitors in a special New Exhibitor Pavilion that opens an hour before the exhibit hall on Wednesday, March 6 and Thursday, March 7. It’s located across from the Hall I exhibit hall entrance.

More than 100 companies have already announced plans to introduce new work trucks and equipment at Work Truck Week 2019.

Read More

Tags
Industry News
Occupational Health & Safety

Optical gas imaging tools for the oil and gas industry

An optical gas imaging camera is a highly specialized version of an IR or thermal imaging camera. It consists of a lens, a detector, electronics that process the signal from the detector, and a viewfinder or screen for the user to see the image produced by the camera.

Infrared (IR) thermal imaging cameras have been used for decades for a variety of oil and gas applications, including electrical/ mechanical inspections, tank level inspections, and even examinations of pipe integrity within process equipment. In recent years, new optical gas imaging (OGI) technology has been developed which can "see" hydrocarbon gases and volatile organic compounds (VOCs) that are venting or leaking to the atmosphere. OGI can be used for meeting regulatory emission reduction requirements, while also helping to reduce product loss, which in turn provides positive return on investment. OGI cameras are a huge time saver compared to other inspection technologies and also offer safety advantages for operators. Major energy companies are using OGI cameras like the FLIR GF320 to quickly check thousands of components and identify potential gas leaks in real-time.

Read More

Tags
Instrumentation, Systems & Automation

KROHNE to manufacture OPTIMASS twin bent tube coriolis mass flowmeter

The OPTIMASS 6400 has been approved for custody transfers of both liquids and gases, making it ideal for process industries and specialist applications like LNG, CNG, or supercritical gases in terminal or storage/bunkering, along with custody transfer applications.

KROHNE, Inc. announces that it has begun manufacturing the OPTIMASS 6400 twin bent tube Coriolis mass flowmeter at its newly opened state of the art flow and level instrument manufacturing and calibration facility located in Beverly, MA. The OPTIMASS 6400 is ideal for standard liquid and gas applications in the chemical and petrochemical, oil and gas, pharmaceutical, food and beverage, and energy and power industries. The OPTIMASS 6400 is equipped with a new signal converter that features advanced device and process diagnostics, compliant to NAMUR NE 107.

Read More

Tags
Industry News

COSIA seeks presenters for Oil Sands Innovation Summit

We encourage submissions from academia - both students and faculty, companies of all sizes, associations, government, research organizations, and individuals who are advancing technologies in the four environmental areas: Land, Water, Tailings and Greenhouse Gases.

Canada's Oil Sands Innovation Alliance (COSIA), Alberta Innovates and Emissions Reduction Alberta (ERA) are seeking presenters to share their research or project results, knowledge and experience at the 2019 Oil Sands Innovation Summit.  

Read More

2019 Ram Heavy Duty provides benchmark for performance and capability

The standard engine in the 2019 Ram 2500 and 3500 Heavy Duty is upgraded to the proven and potent 6.4-litre HEMI V8, delivering class-leading 410 gas horsepower @ 5,600 rpm and 429 lb.-ft. of torque @ 4,000 rpm to handle the payload and towing requirements of the heavy-duty truck user.

The 2019 Ram Heavy Duty is the most powerful, most capable pickup in the segment, according to the manufacturer, with a towing capacity of 15,921 kg (35,100 lbs.) and a payload capacity of 3,484 kg (7,680 lb.). Driving it all is a never-before-seen torque rating of 1000 lb.-ft. from the Cummins 6.7-litre High Output Turbo Diesel engine. The new Ram Heavy Duty also sets benchmarks in ride and handling, luxury, materials, innovation, and technology extending well past any competitive offerings. 

Read More

Tags
Pipelines

T.D. Williamson introduces 4-inch inspection tool for small diameter, low pressure pipelines

According to Tod Barker, Senior Product Manager, Pipeline Integrity, the 4-inch tool overcomes challenges associated with conventional MFL inspections, such as difficulty navigating tight bends and speed excursions that limit data accuracy.

T.D. Williamson (TDW) has commercialized a 4-inch magnetic flux leakage (MFL) + deformation (DEF) + internal versus external discrimination (IDOD) tool that helps ensure pipeline integrity by detecting pitting and general corrosion as well as interacting features such as dents with metal loss in small diameter, low pressure pipelines.   

Read More

Portable vehicle scales​ help heavy-haul carriers stay compliant

Heavy-haul carriers transport oversized objects using public roadways. While these loads may weigh hundreds of thousands of pounds, operators must still comply with permitted limits, while also completing their job safely. Intercomp has a variety of options to fill this unique application for a range of applications including construction, oil & gas, waste and recycling, heavy-haul transportation and electrical utility.

Read More

Tags
Industry News

Allen Engineering promotes Kyle Baker to national sales manager

In his new position, Baker will be responsible for managing, training and recruiting all the Allen direct sales personnel as well as the independent sales representatives that sell Allen Equipment in the United States and Canada.

Allen Engineering Corp. recently announced that Kyle Baker has been promoted to national sales manager for all sales operations in the United States and Canada.

Read More

Tags
Industry News
Power Systems

Encana selects Siemens to provide rotating equipment for Pipestone Processing Facility

Siemens’ SGT-750 turbine offers customers lower life cycle costs compared to competing turbines in the industry.

Siemens was recently selected to provide one feed and sales gas train and one refrigeration compression train for Encana's Pipestone Processing Facility in Grand Prairie, Alberta, Canada. Designed to accommodate future capacity expansion, the Pipestone Processing Facility will provide Encana with 19,000 barrels per day of net raw condensate processing capacity plus 170 million cubic feet per day of net inlet natural gas processing capacity. Keyera will own the Pipestone Processing Facility and provide processing services to Encana. The Facility will have total processing capacity of 200 million cubic feet per day and is expected to start up in 2021.

Read More

Tags
Industry News
Pipelines

TransCanada plans name change to TC Energy

TransCanada Corporation has announced its intention to change its name to TC Energy to better reflect the scope of the company's operations as a leading North American energy infrastructure company. TransCanada's shareholders will be asked to approve a special resolution to change the name at the company's next Annual and Special Meeting of Shareholders.

Read More

Tags
Industry News

Husky considering sale of non-core downstream assets

Husky's retail and commercial network consists of more than 500 stations, travel centres, cardlock operations and bulk distribution facilities from British Columbia to New Brunswick. The myHusky Rewards loyalty program has about 1.6 million members.

Husky Energy will undertake a strategic review and will potentially sell its Canadian retail and commercial fuels business and its Prince George Refinery.

Read More

Tags
Industry News

Seeq announces availability of R21 with new scorecard and FFT analytics

Seeq now supports Fast Fourier Transform (FFT) and expanded reporting capabilities in latest release, increases headcount to support larger and worldwide customer deployments.

Seeq Corporation announces the availability of their latest release, R21, an advanced analytics solution for process manufacturing customers. Seeq enables engineers and scientists in process manufacturing organizations to rapidly analyze, predict, collaborate, and share insights to improve production outcomes. Customers include companies in  oil & gas, chemical, energy, mining and other process industries.

Read More

Tags
Industry News
Pipelines

Demand to drive Canadian oil prices higher in 2019: Deloitte

Deloitte notes that Canadian oil prices should also strengthen in 2019 because of improved export capacity as a result of the Alberta government's plan to purchase additional rail cars to transport crude oil and the expanded capacity of Enbridge's Line 3 pipeline, which transports a variety of Canadian crude oil to the United States.

Prices for Canadian heavy and light oil should improve somewhat in 2019 because of increased demand from refineries in the United States, improving transportation capacity and mandatory productions cuts in Alberta, according to Deloitte's Resource Evaluation and Advisory (REA) group. In its latest report, Deloitte says these factors should begin to reduce the current oversupply of Canadian oil and help narrow the larger-than-usual differentials with WTI prices that were present in the final quarter of 2018.

Read More