Oil & Gas Product News Logo

Canadian upstream oil and gas investment shows small increase compared to U.S., study shows

0160/39906_en_20482_42520_fraserinstitute-logo.jpg

Company info

4th Floor, 1770 Burrard Street
Vancouver, BC
CA, V6J 3G7

Website:
fraserinstitute.org

Read more

From 2016 to 2018, capital investment in Canada's upstream oil and gas industry (essentially, exploration and production) increased 15 percent compared to 41 percent in the U.S. over the same period, finds a new study released by the Fraser Institute, an independent, non-partisan Canadian public policy think-tank.

"Part of the explanation for the diverging fortunes is that in the U.S., they're building pipelines, reducing and streamlining regulations, and reforming taxes to be more competitive while Canada is doing the opposite," said Steven Globerman, senior fellow at the Fraser Institute and author of Investment in the Canadian and U.S. Oil and Gas Sectors: A Tale of Diverging Fortunes.

Moreover, the percentage of oil and gas capital investment in Canada as a share of total capital investment has plummeted, from 28 per cent in 2014 to 13.9 per cent in 2018.

"Clearly, the U.S. has become much more attractive for energy investment and Americans are reaping the economic benefits," Globerman said.

"Unless we see dramatic policy change in Ottawa and in key provinces, we can expect this shift in capital from Canada's energy sector to the U.S. to continue."

More from Drilling & Production

August shows slight yearly increase in Canadian rig count

Baker Hughes, a GE company announced that the Baker Hughes international rig count for August 2019 was 1,138, down 24 from the 1,162 counted in July 2019, and up 130 from the 1,008 counted in August 2018. The international offshore rig count for August 2019 was 244, down 11 from the 255 counted in July 2019, and up 32 from the 212 counted in August 2018.

Portable pumps from SPX FLOW offer workhorses for offshore oil and gas

SPX FLOW has a long history in supplying portable pump technology to the oil and gas industry. Some of its models have proved so successful and popular that they have been around (upgraded and improved) for nearly 50 years and continue to be selected as reliable workhorses for the industry. Of course, technology has advanced over time, creating higher speeds for even greater efficiency, while maintaining high levels of performance and reliability.

Probe ProMAC tools deliver advanced measurement quality and reliability

Probe, a  supplier of cased-hole logging and advanced monitoring technology to the global oil and gas and geothermal industries,  has launched the ProMAC, a new series of multi-arm caliper tools. Designed to increase measurement accuracy, reliability and maintainability, ProMAC series tools offer the most advanced measurements in the industry to provide an accurate profile of the internal surface of tubing, casing and completion assemblies.

Orbital Gas Systems secures GasPTi orders from leading U.S. energy producer and transporter

Orbital Gas Systems has received orders to supply GasPTi systems for deployment across multiple natural gas plants by one of the largest U.S.-based producers and transporters of energy. These orders, part of a nascent, ongoing roll-out of GasPTi across the customer's extensive natural gas assets, will be utilized to deliver operating and environmental improvements and practically eliminate ongoing costs associated with maintenance and natural gas consumption at certain customer facilities. 

Subscribe to our free newsletter

Get our newsletter

Learn more

Efficient pump protection for large pumps: The control valve alternative

In the power production or oil and gas industries, centrifugal pumps for fire protection or condensate systems and other large pumps are critical to operations. However, when unprotected, these units are at greater risk. Operation of these pumps below the minimum flow condition, specified by the manufacturer, can cause overheating—wreaking catastrophic damage to a pumping station. A twin threat, cavitation, can also occur because of operation below the minimum flow condition. These consequences are likely to reduce plant productivity and profitability. The standard pump protection solution, a control valve, offers only complicated functionality and limited economy for installation. For many large pump applications, an all-in-one automatic pump protection valve proves more effective and efficient when compared to a control valve alternative.

Overcoming entrained gas challenges in crude oil transfer

Like snowflakes and human fingerprints, no two oil wells are exactly the same. Even though they may be located on adjacent plots of land, the characteristics of the wells can be vastly different. Whereas one might have a straight, unencumbered path to the product reservoir, the second's drilling route may require a number of dogleg turns to avoid difficult rock and sediment formations, which can give the final wellbore the look of a corkscrew.

Rival downhole tools secures five year collaborative supply agreement for drilling motors

Rival Downhole Tools (Rival), a portfolio company of EV Private Equity, has secured a five-year collaborative supply agreement for drilling motors for US Land from a major oilfield services provider. Rival will utilize its market-leading engineering and operational capabilities to support the customer's substantial and growing directional drilling business. Rival will also accelerate the growth of its operational footprint into multiple basins to optimize its proximity to drilling activity. 

Husky to resume full production at White Rose

Following an extensive investigation, flow line repairs, integrity testing and approval of the Canada-Newfoundland and Labrador Offshore Petroleum Board (C-NLOPB), Husky Energy will resume production from the remaining two drill centres shut in following the November 2018 oil spill offshore Newfoundland and Labrador. Husky will now begin an orderly restart and expects to reach full rates by early next week.

Data acquisition system cuts costs on oil well stimulation services

CAS DataLoggers provided the data acquisition solution for MTS Solutions, an oil field service company headquartered in Bakersfield, California. MTS has been providing well stimulation services in California for over 30 years, maximizing production for clients using both traditional and green products. Data Acquisition Operations Engineer Kevin England explains, "We're a small business 25-man crew, as opposed to a multi-national company, so we needed a cost-effective monitoring solution for our jobs that still had the advanced functionality our customers require."

High HP phase electric motors coupled with pumps provide rapid productivity

Single Phase Power Solutions, the world's only manufacturer of high horsepower single phase electric motors, match their motors to a pump to provide instant productivity.  Available from 30 to 100 HP these single phase pump solutions are easily installed by simply connecting to available single phase utility power - they do not require a phase converter or Variable Frequency Drive (VFD).  The company incorporates their Belle Single-Phase MotorT which uses Written-PoleR technology to power standard suction end centrifugal pumps, rotary gear pumps, and turbine pumps in both horizontal and vertical configurations. These pump solutions are ideal for irrigation, drinking water distribution, well pumps, aquifer management, water treatment, wastewater pumping, wastewater collection, wastewater treatment and discharge, and other water and wastewater processing applications.   With expertise in pump systems design and manufacture, Single Phase Power Solutions team helps determine the correct materials and style of pump to suit specific application requirements.

On/off valves for hazardous areas from CIRCOR

CIRCOR International, a worldwide manufacturer of valves for the power generation, industrial, marine and oil and gas markets for over a century, features high-quality R.G. Laurence on/off control valves for applications demanding rapid opening and sealed closure. ATEX-certified and Factory Mutual-approved R.G. Laurence valves offer reliable performance in high temperature and extreme service conditions.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

July rig count up in Canada, but down from 2018: Baker Hughes

Baker Hughes, a GE company announced  that the Baker Hughes international rig count for July 2019 was 1,162, up 24 from the 1,138 counted in June 2019, and up 165 from the 997 counted in July 2018. The international offshore rig count for July 2019 was 255, up 9 from the 246 counted in June 2019, and up 38 from the 217 counted in July 2018.

PSAC forecast update confirms low investor confidence in Canada

The Petroleum Services Association of Canada (PSAC), in its third update to its 2019 Canadian Drilling Activity Forecast, announced that it is decreasing its forecasted number of wells to be drilled (rig released) across Canada for 2019 from 5,300 (May 2019 revision) to 5,100 wells drilled. PSAC based its updated 2019 Forecast on average natural gas prices of $1.60 CDN/Mcf (AECO), crude oil prices of US$57.00/barrel (WTI) and the Canada-US exchange rate averaging $0.76.

Frac Shack Inc. announces successful launch of NG SideKick

Frac Shack Inc.'s newest innovation, the NG SideKick, is the industry's most sophisticated on-pad gas processing unit that takes in field natural gas and processes it down to a safe and usable state for multiple uses on any location. The SideKick depressurizes, heats, and removes liquids and hydrocarbons from field natural gas to ensure the gas is safe and available for use in any natural gas and bi-fuel engine on a hydraulic fracturing location. 

Messer highlights new "Huff 'N Puff" treatment to recharge well stimulation at the Unconventional Resources Technology Conference 2019

At URTeC 2019, Messer is highlighting its RECHARGE HNP, or "Huff ‘n Puff," technology, a proven solution for well production enhancement. Ideal for re-stimulating depleted oil and gas wells, the energized RECHARGE HNP treatment combines the proven enhanced recovery properties of carbon dioxide (CO2) or nitrogen (N2) with the latest in advanced nanoparticle technology from Nissan Chemical. URTeC takes place July 22 – 24 in Denver.

ESG successfully completes commercial test of high-temperature, high-pressure downhole microseismic system for hydraulic fracture monitoring

ESG Solutions has recently completed a successful commercial test of its new HOTSHOT downhole microseismic system in the Eagle Ford shale. HOTSHOT represents ESG's latest commitment to acquiring the highest quality microseismic data. The new downhole system was designed specifically for high-temperature, high-pressure operational environments up to 177°C/350°F and 10,000 psi.

Subscribe to our free newsletter

Get our newsletter

Learn more

Schroedahl high-efficiency self-modulating pump protection valves

SCHROEDAHL, a CIRCOR International brand and an international leader in pump protection and flow control technology, announces that new, self-modulating TDL Automatic Recirculation Valves (ARVs) are now available in more than 35% lighter cast material. These reliable all-in-one pump protection solutions are designed to keep pumping systems in process, firefighting, refinery, power and chemical applications modulating and running smoothly, without cavitation or overheating.

Environmental assessments begin on BHP Canada and Tilt Cove exploration projects

The Canadian Environmental Assessment Agency has commenced federal environmental assessments for the proposed BHP Canada Exploration Drilling Project and the Tilt Cove Exploration Drilling Project. The two projects are located between 300 and 325 kilometres east of St. John's, Newfoundland and Labrador, in the Atlantic Ocean.

Cleansorb ORCA for OBM well treatments increase production and water injectivity

Cleansorb, a provider of patented chemical well treatments that enhance hydrocarbon production for the international oil and gas industry, announced that following a series of successful ORCA for OBM treatments on offshore oil production wells and a water injection well drilled with OBM, increased production and water injectivity have been achieved on behalf of a major operator in the Middle East.

Canadian rigs creeping upwards in weekly count

Baker Hughes Rig Count: U.S. - 6 to 969 rigs

  • U.S. Rig Count is down 6 rigs from last week to 969, with oil rigs down 1 to 788, gas rigs down 5 to 181, and miscellaneous rigs unchanged at 0.
  • U.S. Rig Count is down 90 rigs from last year's count of 1,059, with oil rigs down 75, gas rigs down 13, and miscellaneous rigs down 2.
  • The U.S. Offshore Rig Count is up 1 rig to 24 and up 4 rigs year-over-year.

NETZSCH showcasing NOTOS multiple screw pumps at 2019 Global Petroleum Show

NETZSCH Pumps North America, LLC, experts in solutions designed specifically for difficult pumping applications, will be highlighting its NOTOS multiple screw pumps at the 2019 Global Petroleum Show (GPS), which will be held June 11-13, 2019, at BMO - Calgary Stampede Park, in Calgary, Canada. Visit Booth #1394 to see the NOTOS, which is ideal for pumping everything from light fuel oil to viscous asphalt. Also to be featured are NEMO full service-in-place (FSIP) progressing cavity pumps and TORNADO rotary lobe pumps.

Siemens enters Permian gas processing market with innovative electric-drive centrifugal compression solution

Siemens was recently awarded a contract to provide three residue compression trains for two, 250 million (500 million total) standard cubic feet per day (MMSCFD) cryogenic gas plants in the Delaware Basin. The customer, a key producer in the region and long-term user of reciprocating compression equipment, recognized the benefits of centrifugal compression and looked to Siemens for a fully integrated, turnkey solution that includes compressors, motors, variable frequency drives, and associated process equipment.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more