Oil & Gas Product News Logo

KROHNE highlights OPTIWAVE radar level transmitters at 2019 ILTA show

Stop by Booth 306 to see demonstration of OPTIMASS 1400 Coriolis mass flowmeter

The OPTIWAVE 5400 and OPTIWAVE 7400 24 GHz radar level transmitters to be showcased are designed for specific industry needs, delivering reliable and accurate level measurement of liquids and solids, even in the most difficult applications.
The OPTIWAVE 5400 and OPTIWAVE 7400 24 GHz radar level transmitters to be showcased are designed for specific industry needs, delivering reliable and accurate level measurement of liquids and solids, even in the most difficult applications.

KROHNE, Inc. announces it will highlight the OPTIWAVE 5400 and OPTIWAVE 7400 radar level transmitters for liquids in chemical, oil & gas and power industries at the 2019 International Liquid Terminals Association's (ILTA's) Annual Operating Conference & Trade Show, to be held June 3-5, 2019, at the George R. Brown Convention Center, in Houston, Texas, Booth 306. Also to be showcased will be the OPTIMASS 2400 twin straight tube Coriolis flowmeter. Experts will be on hand to conduct a demonstration of the OPTIMASS 1400, a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of standard applications with gases and liquids. 

The OPTIWAVE 5400 and OPTIWAVE 7400 24 GHz radar level transmitters to be showcased are designed for specific industry needs, delivering reliable and accurate level measurement of liquids and solids, even in the most difficult applications. KROHNE offers an extensive choice of process connections, as well as lens, drop and horn antennas to suit all process and installation conditions. The transmitters offer a measuring range from the antenna edge up to 328 feet (100 meters), with accuracy from ±0.08 inches (±2 millimeters). The OPTIWAVE transmitters can measure products with dielectric constants as low as 1.4, and feature a quick setup assistant for easy commissioning as well as an empty tank spectrum function for eliminating false reflections.

The OPTIMASS 2400 twin straight tube Coriolis flowmeter to be highlighted feature Entrained Gas Management (EGM™), which means there is no loss of measurement with gas entrainment up to 100 percent of volume.

Experts will also be on hand to conduct an on-site demonstration of OPTIMASS 1400, a Coriolis mass flowmeter for universal applications and process control that can handle gases and liquids up to 6,235 pounds/minute or 170,000 kilograms per hour. The meter features EGM for liquid applications, enabling continuous and uninterrupted measurement of volume flow and mass, density, and temperature - even at difficult process conditions with 2-phase flow.

More from Instrumentation, Systems & Automation

CAS DataLoggers provide unique safety support in chemical plant

CAS DataLoggers provided a unique gas monitoring and temperature monitoring solution for an international chemical company, where health and safety was an important consideration. Harmful gas detection was placed high on the list of priorities: hydrochloric acid gas was produced when a standard chemical made by the company leaked to the atmosphere as fumes, while chlorine was used as a raw material at the plant. Therefore, it was necessary to monitor and record both hydrochloric acid gas levels (HCL) and chlorine (CH2) levels. 

Flare gas meter from FCI simplifies meter calibration verification

With the VeriCal In-Situ Calibration Verification System for the ST00 Series Flare Gas Flow Meter from Fluid Components International (FCI), process and plant engineers can now eliminate the cumbersome task of traditional flow meter calibrations, which require shutting down the line, pulling the meter, installing a spare and  sending the meter out to a lab to help meet air quality management regulations.

CyberSecure LVDT signal conditioner offered by Alliance Sensors Group

H.G. Schaevitz LLC dba Alliance Sensors Group introduces its latest LVDT signal conditioner, the highly advanced SC-200.  This LVDT signal Conditioner offers smart and fast LVDT/RVDT setup and has been engineered to work with the widest range of LVDTs, RVDTs, and inductive half-bridge sensors including 3-wire industrial LVRTs. The signal conditioning module has cyber security tamper prevention and notification features that no other manufacturers have even considered, providing confidence that the unit has not been compromised.

Emerson personalized digital tools deliver measurable productivity gains

Emerson‘s new personalized digital experience - MyEmerson - accelerates digital transformation by connecting people and technology through streamlined work processes and better collaboration. With a MyEmerson online account, users can access digital tools to quickly engineer solutions, manage software and installed assets, access training, collaborate with experts, streamline procurement processes, and improve visibility into buying history and trends.

Subscribe to our free newsletter

Get our newsletter

Learn more

Endress+Hauser device configuration portfolio expanded to cover hazardous areas

Endress+Hauser expands its product portfolio for device configuration by introducing the Field Xpert SMT77, a rugged tablet PC tool for commissioning and maintenance staff to manage field instruments and document the work progress.  The SMT77 comes preinstalled with device configuration software and device library —so it is ready to go, right out of the box. The device enables plant asset management in Class 1 Div 1 hazardous areas.

Eight-path meter from Emerson adds accuracy for flow measurement

Emerson has introduced the Daniel 3418 Eight-Path Gas Ultrasonic Flow Meter, which delivers highly accurate flow measurement in natural gas custody transfer applications with reduced upstream piping requirements and without flow conditioning. The Daniel 3418 compensates for flow distortions that result from pipe bends, shorter straight runs or smaller design footprints, allowing it to operate in more design configurations without sacrificing accuracy and long-term performance.

Probe ProMAC tools deliver advanced measurement quality and reliability

Probe, a  supplier of cased-hole logging and advanced monitoring technology to the global oil and gas and geothermal industries,  has launched the ProMAC, a new series of multi-arm caliper tools. Designed to increase measurement accuracy, reliability and maintainability, ProMAC series tools offer the most advanced measurements in the industry to provide an accurate profile of the internal surface of tubing, casing and completion assemblies.

Wearable connected technology from Honeywell improves compliance and productivity

Honeywell has announced that Braskem Idesa has adopted a hands-free, wearable connected technology solution at its plant in Veracruz, Mexico. Honeywell's Intelligent Wearables will allow Braskem Idesa to improve productivity and compliance with process procedures, capture the expertise of experienced workers and provide critical insights and information effectively to trainees and support workers in the field.

Analyzer verification in hazardous environments relies on SIL-2 rated flow switch/monitor

Engineers tasked with ensuring the continuous verification of gas or liquid analyzer performance in demanding industries and/or hazardous environments where safety, product quality and productivity are essential will find the advanced FS10A Analyzer Flow Switch/Monitor from Fluid Components International (FCI) provides the required dependability, accuracy and responsiveness necessary to meet their requirements. 

Emerson’s wireless pressure gauges modernize well monitoring and enhance safety at Prudhoe Bay

The Alaska Oil and Gas Association has awarded the "Alaska Oil & Gas Project of the Year for Environmental Stewardship and Innovation" to BP Alaska's Prudhoe Bay Unit Well Operating Limits Project. The three-year program began in 2016 and involved the field-wide installation of Emerson's Rosemount Wireless Pressure Gauges at the Prudhoe Bay field helping transform how the wells are monitored. 

New handheld analyzer uses LIBS for fast, accurate carbon and alloy measurement in the field

Designed for scrap recyclers, petrochemical plants, fabricators and quality control departments seeking to measure low concentrations of carbon in metal, along with a range of elements, Thermo Scientific's new lightweight Niton Apollo handheld LIBS analyzer features laser-induced breakdown spectroscopy (LIBS) for speed, increased accuracy and greater mobility.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Festo’s new PCRP a tough filter regulator for many harsh environments

Corrosive atmospheres, extreme temperatures, explosive zones, indoor or outdoor applications: Festo's PCRP filter regulator delivers high flow rates and reliable compressed air pressure control in a range of harsh environments. Its housing and interior are made entirely of premium stainless steel to ensure high corrosion resistance. The UV-resistant PCRP functions reliably outdoors and at temperatures ranging from -60°C to +80°C. Its also built rugged for potentially explosive zones 1, 2, 21 and 22.

FCI product knowledge workshop offers free training on thermal flow meters and flow switches

Fluid Components International (FCI) has opened registration for its next free customer training Product Knowledge Workshop, which will take place on October 15-16 in San Marcos, California.  This workshop is designed to provide customers comprehensive training on FCI thermal dispersion mass flow meters, flow switches, and level switches.

Tough outdoor enclosures simplify advanced remote I/O plant control architectures

Intertec Instrumentation is launching a range of tough field enclosures for housing remote I/O and other control and instrumentation electronics, featuring compact passive cooling to dramatically reduce costs of ownership. The new enclosures help EPCs and processing plant engineers to eliminate the need for large and costly plant buildings such as satellite instrument houses or remote instrument enclosures - which often need to be air conditioned and blast- and fire-resistant.

Oil refinery uses standalone data logger to help increase efficiency

CAS DataLoggers has provided an automated data collection and transfer solution for a crude oil refinery which wanted a standalone data logger to take thermocouple readings in several their observation wells. These shafts are connected to the refinery via extensive pipelines for subsequent processing. Management stressed that alarming features were important-sudden temperature spikes during crude extraction could cause a rupture, while sudden drops lowered pumping efficiency.

Coriolis mass flow meters from TRICOR offer compact, high performance measurements

AW-Lake Company introduces the new PRO Plus Series of TRICOR Coriolis Mass Flow Meters that incorporates a new sensor with their DSP transmitter (released earlier this year) to provide a complete flow measurement solution in a compact configuration for simple installation in a variety of applications with limited space.  In addition to the smallest installation length on the market, the PRO Plus Series features a self-draining, hygienic design to provide high performance under harsh and sanitary process conditions.

Modbus now available on FCI line of compact thermal mass air/gas flow meters

Process engineers who need to communicate flow measurement information over Modbus about air or gases flowing in line sizes from 0.25 to 24 inches (6 to 610 mm) will find the newly extended lines of ST51A and ST75A Flow Meters from Fluid Components International (FCI) provide the solution in a highly accurate, rugged, and compact instrument.

ESG successfully completes commercial test of high-temperature, high-pressure downhole microseismic system for hydraulic fracture monitoring

ESG Solutions has recently completed a successful commercial test of its new HOTSHOT downhole microseismic system in the Eagle Ford shale. HOTSHOT represents ESG's latest commitment to acquiring the highest quality microseismic data. The new downhole system was designed specifically for high-temperature, high-pressure operational environments up to 177°C/350°F and 10,000 psi.

Emerson’s radar level gauge optimizes separation performance with industry-leading top liquid layer measurement capability

Emerson has enhanced its Rosemount 5300 Guided Wave Radar Level Transmitter to optimize separation process performance and prevent costly product ingress by accurately measuring a thinner top liquid layer in interface applications. The Rosemount 5300, which is the market-leading guided wave radar for liquid level measurement (VDC Research 2017), can now also perform measurements to the top of a tank, enabling increased throughput and profitability. Additional new features provide greater ease-of-use, increased safety and enhanced performance in the most challenging level and interface applications.

Intuitive, easy-to-use INOR Connect app makes it easy to configure a signal converter

INOR Process AB announces a whole new way to configure and monitor temperature transmitters without supply voltage and cables. Operators can connect to the transmitter with a smartphone or tablet using near-field communication (NFC) or Bluetooth and configure through the new INOR Connect app. Using wireless communication means operators never need to remove the signal converter from the process. Now available are the INOR 330 series temperature transmitters, and the INOR 530 series, fully compatible with HART 7.

Subscribe to our free newsletter

Get our newsletter

Learn more

Thermal mass flow meters simplify and reduce cost of natural gas flow measurement

Providing an accurate, simple, economical solution to the measurement of natural gas for industry, the ST75A and ST51A Thermal Flow Meters from Fluid Components International offer all the advantages of thermal mass flow sensing technology including accuracy, reliability, low maintenance, long life and low-life cycle costs.

Det-Tronics expands detection capability of X3302 Multispectrum Infrared Flame Detector

The X3302 multispectrum infrared flame detector (X3302) from Det-Tronics is now third-party approved for the industry's largest field-of-view for hydrogen fires, as well as approved for methane, methanol and synthesis gas (syngas) fires. Det-Tronics, a leader in fire- and gas-safety systems, is a part of Carrier, a global provider of innovative heating, ventilating air conditioning (HVAC), refrigeration, fire, security and building automation technologies.

New fingerboard control system from Festo provides enhanced safety, durability

Festo has made the world's first software-driven valve terminal - the VTEM Motion Terminal - the technology core of a new pneumatic fingerboard latching system for drill-rig tublars that offers enhanced safety and durability. This control and monitoring system utilizes the VTEM's intelligent valves to control and monitor the fully locked or completely open position of each latch in lieu of placing electronic sensors and wire harnesses on the fingerboard. 

New SIL rated ST80 thermal mass flow meter for Safety Instrumented Systems (SIS)

Process and plant engineers designing or instrumenting safety integrity systems (SIS) requiring air or gas flow meters will want to discover the new SIL compliant ST80 Series Thermal Mass Flow Meter from Fluid Components International (FCI) FCI's ST80 has already been independently evaluated by industry expert exida for compliance and the FMEDA summary is available for review by prospective users.           

Siemens, Chronicle to provide industrial cyber threat protection for energy industry

Siemens and Chronicle, an Alphabet company, today announced a new partnership to protect the energy industry's critical infrastructure from increasingly sophisticated and malicious industrial cyber threats at Spotlight on Innovation, Siemens flagship U.S. technology and innovation conference. Through a unified approach that will leverage Chronicle's Backstory platform and Siemens' strength in industrial cyber security, the combined offering gives energy customers unparalleled visibility across information technology (IT) and operational technology (OT) to provide operational insights and confidentially act on threats.

Conduct reliable hydrostatic pressure tests with AMETEK STC XP2i

Within natural gas systems, one of the most important methods to verify the integrity of pipelines is through the hydrostatic pressure test. Designed to test the transmission systems - one of the largest sections in a natural gas system - the hydrostatic test varies on the level of requirements. Depending on local regulations, it may require testing pressure and multiple temperatures in the pipeline for several hours prior to and after a pipe is put into service.

AW-Lake upgrades hazardous area rated flow sensor

AW-Lake Company now offers its HUB-40EX Hazardous Area Rated Flow Sensor with a choice of either sinking or sourcing digital output and a choice of 316 stainless steel or aluminum junction box; or for areas with limited space, a version with no junction box at all.  Compatible with any stainless-steel AW-Lake flow meter, the explosion-proof frequency output sensor is ideal for use in any industry or flow measurement application requiring an explosion-proof sensor such as chemical injection or hydraulic fracturing.

AW-Lake expands Bluetooth products with new flow rate transmitter

AW-Lake adds the RT-50 Flow Rate Transmitter to its Bluetooth Series of Products that support remote monitoring and programming of its flow meters from the convenience of a smartphone.  The FAC-S Analog Output Sensor and FAC-R Frequency to Analog Converter also offer Bluetooth connectivity and analog output options when interfacing with AW-Lake Flow Meters and other instrumentation.  Bluetooth connectivity provides an added convenience for users to monitor and program flow meters from the convenience of a smart device.

  • The RT-50 Battery-Powered Flow Rate Transmitter offers a local and remote display of flow rates in locations where equipment is exposed to different environmental elements.  When operating locally, the transmitter offers a six-digit LCD display that continuously shows either the flow rate or total.   When using Bluetooth connectivity, users can opt to view readings and adjust rate, total, reset, sleep mode, or time on a smart device
  • The FAC-S  Analog Output Sensor is ideal for users of AW-Lake flow meters that want a voltage, current or handheld flow reading.  Mounted directly to a gear or turbine flow meter, the FAC-S Analog Output Sensor provides five user-selectable analog and current outputs including 4-20mA, 0-5V, 1-5V, 0-10V, and 2-.  Using the Bluetooth interface, users can program and watch live flow measurements from the convenience of a smartphone.  The microprocessor-based FAC-S Sensor supports process monitoring, data acquisition and signal conditioning in various industries.
  • A remote version of the FAC-S, the FAC-R Frequency to Analog Converter interfaces with flow meters, tachometers, pumps, motors and linear/rotational encoders to convert sensor frequency to current and analog outputs.  Bluetooth connectivity supports remote programming and flow monitoring from a smartphone.  An economical alternative to a PLC card, the FAC-R is ideal for use in process monitoring, data acquisition and virtually any application when sending an analog signal to a PLC or other control system. 
Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more