Control Company’s Traceable Flashing LED Alert Big-Digit Alarm Timer with unbeatable 0.01% accuracy, has extra-large 1-inch high digits, flashing LED, and adjustable alarms. Unique microcomputer chip allows memory to store countdown times: easy for users to program and save their three most frequently used settings. Multi-purpose timer counts down from 99 minutes, 59 seconds to 1 second. When zero is reached, timer starts counting up to show time elapsed since alarm sounded. Adjustable alarm has three settings: high volume for noisy areas, low for quiet environments, and muted for visual flashing only. See-from-anywhere, vivid green indicator flashes every second after countdown time reaches ten seconds. Red light flashes when zero is reached and alarm is sounding. To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Timer supplied with magnetic back, flip-open stand, spring clip, opening for lanyard, AAA batteries, Traceable Certificate. Size: 3½ x 2¼ x ⅝ inches. Weight: 2½ oz.
Control Company’s new Traceable Hygrometer/Thermometer/Barometer/Dew Point Pen has the following ranges: Relative humidity range is 10.0 to 95.0% with a resolution of 0.1% and an accuracy of ±3% RH mid-range to ±4% RH elsewhere. Temperature range is 32.0 to 122.0°F and 0.0 to 50.0°C with a resolution of 0.1° and an accuracy of ±1°C. Dew point range is 13.5 to 120.1°F and –25.3 to 48.9°C with a resolution of 0.1°.
Control Company’s new Traceable pH Buffer Standards, Certified Reference Materials, are 100% compatible with all instruments and probes. Accuracy for the Traceable Buffer at 25°C is ±0.010 pH — the most precise available. Certified Reference Materials meet Federal/State/local agencies’ strictest mandates and deliver exact calibration results for any pH meter.
Control Company’s new Traceable Digital Hygrometer/Thermometer/Dew Point instrument provides a response time of under 10 seconds with a resolution of 0.01 percent RH, 0.01 degrees F/degrees C, and 0.01 degree dew point degrees F/degrees C. It samples one-and-a-half times per second. “Fuzzy logic” algorithm pinpoints the exact answer almost instantly. Direct-reading instrument has an accuracy of ±1.5 percent RH and ±0.4 degrees C. Results are reported in both degrees F and degrees C from -40.00 to 220.0 degrees F (-40.00 to 104.0 degrees C) temperature, and from -40.00 to 140.0 degrees F (-40.00 to 60.00 degrees C) dew point. To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. Four-digit LCD display can be read from 10 feet. The rugged handheld unit is designed for years of service. Its memory recalls both highest and lowest readings in dew point, temperature, and humidity at any time. High and low alarms can be programmed in dew point, temperature, and humidity.
The new Infrared Thermometer Gun with Type K Probe is simple to operate – turn on, point at sample, and take a reading in less than a second. Unit reads both Fahrenheit and Celsius of any surface – solids, semisolids and liquids. Non-invasive, no-touch, measurements are ideal for petroleum products. Temperature range is -76 to 932 degrees F and -60 to 500 degrees C. Resolution is 0.1 degree. Accuracy is ±1 degree C + 2 percent.
Control Company’s traceable general-purpose hygrometer/thermometer is a perfect quality-control unit which displays accurate answers for every air measurement. Self-contained, the humidity and temperature sensors are built into the case. It features a separate data hold switch so that readings may be captured and noted.
Control Company’s 24-hour and traceable seven-day controller units combine a controller and an eight-outlet strip in a single package.The controllers can turn on chemical, water, or air pumps as part of a sampling process; warmup instruments at preset times; and automate testing, heating, mixing, or even feeding animals. Both have time-controlled and manual outlets.
Control Company’s new traceable general purpose hygrometer/thermometer is a quality-control unit which displays accurate answers for every air measurement. It features a separate data-hold switch so that readings may be captured and noted. The humidity and temperature sensors are built into the case.