Oil & Gas Product News Logo

Pipeline Seal & Insulator, Inc.

Address 6525 Goforth Street, Houston, TX, 77021, US
Phone 800-423-2410
Fax 713-747-6029
Email [email protected]
Website pipelineseal.com

Related Articles

Trio of maxi-size drill rigs

Vermeer Corporation has expanded its line of NAVIGATOR horizontal directional drills with the introduction of three maxi-sized drill rigs, D500x500, D750x900 and D1000x900, designed specifically for large diameter pipe installations. The drill platform is built upon the proven and reliable Horizontal Rig & Equipment (HRE) design, acquired earlier this year by Vermeer. The three drills feature pullback forces of 500,000 pounds, 750,000 pounds and 1,000,000 pounds. To allow the contractor to focus on performance, the drills feature a simple, proven design that eliminates the number of drive components, including high-speed motors and reduction gearboxes. Vermeer Corporation #6060 Gasket for sealing applications The LineSeal sealing and flange isolation gasket is an alternative for extreme critical sealing applications. The LineSeal gasket is designed to perform at a higher level than what is currently being used in the industry. The 316 stainless steel cored gasket features G-10 retainer material and a PTFE (Teflon) seal as a standard. Seals feature pressure ratings through ANSI 2500 class and API 15,000 psi service; while withstanding CO2 or H2S. Proven in service overseas, the LineSeal gasket was recently tested to the detailed and rugged Shell testing standard.

Pipeline anti-corrosion system

The Riser-Wrap seal is a two-layer system designed for corrosion and sealing protection on encapsulating manholes and pipelines to seal joints against ground water infiltra-tion, tolerant to soil stress, UV and freeze-thaw conditions. The first layer is a rugged sealant encapsulated by a heat shrink sleeve. A 2.5-mm cross-linked, high density polyethylene membrane. Applications are for manholes (pre-cast base, cone, risers, cast iron frame), concrete vaults boxes, septic tank joints, repair and step-down joints. Designed for rehab and new construction.

Line-Seal gasket seals flanges

In highly sensitive areas, where operators can’t afford a leak, the LineSeal gasket seals fl anges containing high pressure or extremely dangerous product. Pipeline Seal & Insulator, Inc. announces an alternative for extreme critical sealing applications: the new LineSeal sealing and fl ange isolation gasket. PSI has developed the LineSeal gasket to perform at a higher level than what is currently being used in the environment. The 316 stainless steel cored gasket features G-10 retainer material and a PTFE (Tefl on) seal as a standard. It seals all pressure ratings through ANSI 2500 class and API 15,000 psi service, while withstanding CO2 or H2S. Proven in service overseas, the LineSeal gasket has recently been tested to the detailed and rugged Shell testing standard. It is available as a standalone gasket or as part of a high-quality PSI fl ange isolation kit. All PSI sealing gasket products are manufactured to ISO 9001:2000 standards and are available in Edmonton, Alberta, by GasketMaster.

New gasket for extreme critical sealing applications

Pipeline Seal and Insulator announces the new LineSeal sealing and flange isolation gasket, an alternative for extreme critical sealing applications. PSI has developed the LineSeal gasket to perform at a higher level than what is currently being used in the industry. The 316 stainless steel cored gasket features G-10 retainer material and a PTFE (Teflon) seal as a standard. Seals feature pressure ratings through ANSI 2500 class and API 15,000 psi service; while withstanding CO2 or H2S. Proven in service overseas, the LineSeal gasket was recently tested to the detailed and rugged Shell testing standard. Available as a standalone gasket or as part of a high-quality PSI flange isolation kit. All PSI sealing gasket products are manufactured to ISO 9001:2000 standards.

LINEBACKER SEALING GASKETS

Pipeline Seal & Insulator (PSI) has been manufacturing the LineBacker sealing gasket for over 40 years for the oil and gas industry. The LineBacker sealing gasket works in all ANSI Class Flanges. The exclusive sealing element design is a “Quad” ring placed within a unique groove design, offering excellent recovery values in accordance to ASTM F-36. The LineBacker gasket features sealing solutions while reducing stress on flanges and bolts. All PSI sealing gaskets are manufactured to ISO 9001:2000 standards.

SEALING GASKETS

Pipeline Seal & Insulator, Inc. has been manufacturing the LineBacker sealing gasket for over 40 years for the oil/gas industry. The patented and high performing LineBacker sealing gasket, works in all ANSI Class Flanges. The exclusive sealing element design is a “Quad” ring placed within a unique groove design, offering excellent recovery values in accordance to ASTM F-36. The LineBacker gasket features sealing solutions while reducing stress on flanges and bolts. All PSI sealing gaskets are manufactured to ISO 9001:2000 standards.

free-paper-airplane

Get our newsletter

Learn more