Oil & Gas Product News Logo

Halogen Valve Systems

Address 17961 Sky Park Circle, Suite A, Irvine, CA, 92614, US
Phone 877-476-4222
Fax 949-261-5033
Email [email protected]
Website halogenvalve.com

Related Articles (7)

Emergency toxic gas shutoff system

Eclipse Actuators quickly close toxic gas valves on 150-pound and ton cylinders in less than one second when activated by remote sensors. These electronic actuators are “close only devices” requiring an operator to visit the site to determine the cause of the problem. The operator can then correct the condition, check the facility, and then manually reset the valve before restarting the gas system. The Eclipse is a battery-operated actuator and allows an operator or remote gas sensor to shutoff leaking toxic gas without requiring the operator to enter the hazardous atmosphere. The chlorine valve can be opened or closed manually with the actuator installed and ready to operate. The Eclipse actuators are easily installed on existing, standard ton or cylinder hardware and can be tested by the operator on-site to assure correct operation.

Manage up to six valve actuators easily

The Hexacon Model II control system quickly closes up to six Eclipse actuators on toxic gas cylinder and ton container valves by remote contact switches.
The Model II microprocessor system applies 30 foot-pounds of torque for test closures and 50 foot-pounds of torque for emergency closures of cylinder valves.
All Fire Codes recognize and approve the “automatic-closing fail-safe shutoff valve” system in lieu of a scrubber. With a SCADA option the system provides actuator closure status and error codes to quickly analyze problems and to take corrective action. Use the Hexacon shutoff system to secure facilities 24/7.

Toxic gas shut-off system

Eclipse Actuators quickly close toxic gas valves on 150-pound and ton cylinders in less than one second when activated by remote sensors. These electronic actuators are “close only devices” requiring an operator to visit the site to determine the cause of the problem. The operator can then correct the condition, check the facility, and then manually reset the valve before restarting the gas system.

Toxic valve shutoff system

H a l o g e n Valve Systems’ Terminator Actuator quickly c l o s e s 150-pound toxic gas cylinder valves in three seconds when activated from remote sensors and switches.

EMERGENCY TOXIC GAS SHUT-OFF SYSTEM

Eclipse actuators quickly close toxic gas valves on 150-pound and ton cylinders in less than one second when activated by remote sensors. This actuator system will then provide a closed contact to signal that the valve is closed and sealed. The operator can then visit the site to correct the condition, check the gas connections, and manually reopen the valve to start the gas system.

SATELLITE GAS DETECTOR

The satellite gas detector (Model HVS400) monitors and reports a variety of hazardous and toxic gases to a SCADA system or other electronic monitoring equipment. Its features include an LCD status indicator, one-person calibration, magnetic tamper-free switching, and 4-20 mA analogue gas level outputs. This system can be connected through a SCADA system or other electronic system to Halogen’s emergency gas shutoff systems to immediately remedy a gas leak.The microprocessor-based electronics detect most toxic gases in parts per million (ppm). The gases detected include: ammonia, carbon monoxide, chlorine, chlorine dioxide, ozone and sulphur dioxide. The satellite gas detector is compact (only 4.5 inches long) and certified as intrinsically safe for use in hazardous locations.

TOXIC GAS MULTI-ACTUATOR VALVE CONTROLLER

The Hexa-con Model II control system quickly closes up to six Eclipse a c t u a t o r s on toxic gas cylinder and ton container valves when activated by panic buttons or remote gas sensors. The newly designed Model II computer system applies 30 foot-pounds of torque for test closures and 50 foot-pounds of torque for emergency closures of the cylinder valve. All fire codes recognize and approve the “automatic-closing fail-safe shutoff valve” system in lieu of a scrubber treatment system. With a Hexacon Model II, your SCADA system can be provided with actuator closure status and error codes to quickly analyze problems and take the appropriate corrective action. When combined with a Halogen Valve gas detection system, you will have a secure facility 24/7.

Subscribe to our free newsletter

Get our newsletter

Learn more